Print this page


PILOCEM is a cement based multi purpose ,ready-mixed dry packed mortar mix with a wide range of applications in the field of building industry. It is a blend of ordinary portland cement, hydrated lime and properly draded fillers cobined with chemical additives as improving agents. It replaces mixtures prepared on the site using conventional compositions.

The Use

PILOCEM replaces the mixtures prepared on site· using· the convectional compositions. The main applications are:

  • Laying of clay bricks,concrete hollow blocks and natural stones.
  • Undercoat plastering and rendering of solid backrounds made of bricks,concrete and AAC-Blocks.
  • Flooring of substrates with ceramic tiles, marble, and quarry tiles using the thick-bed method.
  • Concrete repair and patching.

Additional Info

  • Product Description

  • Type: powder
  • Grading: 0-2.5mm
  • Colour: grey
  • Bulk Density: 1.46 Kg/lit
  • Inflammability: NO
  • Health Hazard: NO
  • Characteristics of Mix

  • Mixing ratio (water/dry material): 0.24
  • Volume yield of wet mix: 630 lit/ton
  • Weight of fresh mortar: 1.8 Kg/lit
  • PH of mix: >12
  • Water retention of the mix: good 1*
  • Pot life: > 4 hours
  • Open time after application: ½ - 1 hour 2*
  • Minimum thickness: 8mm
  • Maximum thickness: 15mm
  • Cure time: 14 days
  • Final Performance (Typical Value)

  • Compressive strength: 5.1 N/mm2
  • Flexural strength: > 1.8 N/mm2
  • Tensile adhesion strength: > 0.25N/mm2
  • Water absorption: W1
  • Water vapour permeability co-efficient (µ): μ 25 (tab. value)
  • Thermal conductivity: P = 50% λ= 0,83 W/mK (tab. values)
  • Weight of hardened mortar: 1.61 Kg/lit
  • 1*: Depend on the absorption of the background.
  • 2*: Depend on the weather conditions and the absorption of the background.
  • PDF Downloads