45-years-in-business

ECO-THERM (EN 998-1 Class T1)

ECO-THERM is a premixed dry packed thermal & sound insulating plaster for internal and external use in accordance with EN 998-1, class T1.

It is a dry blend of expanded·perlite, natural hydraulic lime & ordinary Portland cement combined with chemical additives as improving agents.

The plaster is specially formulated for one coat application by plastering machine that mix and spray in one operation or by hand.

Unlike polystyrene base plaster, ECO-THERM is ecological due to its inorganic nature and free of plastics and organics.

Additional Info

  • Product Description

  • Type: powder
  • Grading: 0-1.2mm
  • Colour: grey
  • Bulk Density: 420 Kg/μ3
  • Inflammability: NO
  • Health Hazard: NO

  • Characteristics of Mix

  • Mixing ratio (water/dry material): 0.88
  • Volume yield of wet mix: 2500 lt/ton
  • Weight of fresh mortar: 0.75 Kg/lit
  • PH of mix: >12
  • Water retention of the mix: very good
  • Pot life: > 3 hours
  • Open time after application: 1 - 2 hours
  • Minimum thickness: 10mm
  • Maximum thickness: 30mm
  • Cure time: 14 days

  • Final Performance (Typical Value)

  • Compressive strength: 0.6 N/mm2
  • Flexural strength: 0.9 N/mm2
  • Tensile adhesion strength: 0.16N/mm2
  • Water vapour permeability co-efficient (µ): 4.48
  • Thermal conductivity: T1 standard
  • Sound transmission class (SLC): 59dB (500 Hz @ 4cm thickness)
  • Weight of hardened mortar: 580 Kg/m3
Tagged under

Related items

More in this category: « UP-Projection Plaster (Light Weight) (EN 998-1 :2010) UP Therm (Class T2) »
back to top

CYPRUS

Head Office: Michali Zeipekki 23, 4525 Moni - Limassol, Cyprus.
Tel: (+357) 25 632 642, Fax: (+357) 25 632 091, E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

EGYPT

A.B.I. Borg El-Arab, Alexandria, Egypt, Industrial Zone, Phase 4.
Tel: 00203 4595967/8/9, Fax: 00203 4595971, E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

SAUDI ARABIA

P.M.I. Al Khumrah Industrial Area, Jeddah, Saudi Arabia. Tel/Fax: 00966 266 29901/2/3, E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

UAE

Zeiplast Emirates. Delma St.,Abu Dhabi,U.A.E P.O.Box 42591
Tel: 00971 24 456789, Fax: 00971 24 456788 E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.