General purpose tile adhesive consists of a blend of white portland cement and properly graded fillers combined with chemical additives as improving agents
Additional Info
-
Product Description
- Type: powder
- Grading: 0-0.6mm
- Colour: white
- Bulk Density: 1.3 Kg/lit
- Inflammability: NO
- Health Hazard: NO
-
Characteristics of Mix
- Mixing ratio (water/dry material): 0.42
- Volume yield of wet mix: 850 lit/ton
- Weight of fresh mortar: 1.65 Kg/lit
- PH of mix: >12
- Water retention of the mix: very high
- Pot life: > 4 hours
- Open time after application: About 20 mins
- Adjustability time: About 40 mins
- Grouting: After 6 hours
- Cure time: 14 days
-
Final Performance (Typical Value)
- Initial tensile adhesion strength: ≥ 0,5 N/mm3
- Tensile adhesion strength after water immersion: ≥ 0,5N/mm3
- Tensile adhesion strength after heat ageing: ≥ 0,5 N/mm3
- Tensile adhesion strength after freeze / thaw cycles: ≥ 0,5 N/mm3
- Open time: ≥ 0,5 N/mm3 after 20 min
- Weight of hardened mortar: 1.22 Kg/lit